::: 

校長照片

 

鄧作樑 校長


 



學歷

  • 中正理工學院國防科學研究所工學博士
回到頁面上方 top

經歷

服務機關學校職稱專/兼任任職起迄年月
修平科技大學副校長103年8月~ 106年2月
修平科技大學機械系講座教授99年8月~ 迄今
修平科技大學工程學院院長99年8月~ 103年7月
大葉大學機械與自動化系特聘教授90年8月~ 99年7月
大葉大學工學院院長96年2月~ 99年7月
大葉大學
先進車輛研究中心
主任93年8月~ 95年2月
修平技術學院
工業工程與管理系
教授89年8月~ 90年7月
中正理工學院兵器系教授88年8月~ 89年7月
中正理工學院兵器系副教授83年6月~ 88年7月
中正理工學院兵器系館長75年7月~ 77年8月
中正理工學院兵器系講師75年7月~ 79年8月
回到頁面上方 top

專長領域

  • 結構分析
  • 最適化設計
  • 車輛撞擊事故分析
  • 車輛被動安全裝備設計與分析
  • 人體損傷分析
回到頁面上方 top

論文

  1. Tso-Liang Teng, Cho-Liang Liang, Van-Hai Nguyen, 2016, Analysis of a Bicyclist’s Head Injury in Lateral and Frontal Impact by Using the Human Full-body Model, (Submitted to PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART P-JOURNAL OF SPORTS ENGINEERING AND TECHNOLOGY, in review) [SCI, EI]
  2. Tso-Liang Teng, Peng-Hsiang Chang, Cho-Chung Liang and Da-An Fung, 2016, Application of Crash Pulse on the Car Crashworthiness Design, Advances in Mechanical Engineering. (Accept for publication) [SCI, EI]
  3. Tso-Liang Teng, Cho-Chung Liang, Ching-Yu Hsu, Chien-Jong Shih, Thanh-Tung Tran, 2016, Effect of Soil Properties on Safety Performance of W-beam Guardrail, Advances in Engineering Research, Vol.52, pp.34-36.
  4. Ching-Yu Hsu, Cho-Chung Liang, Tso-Liang Teng, Hai-Anh Nguyen, 2016, A Numerical Study of Hovercraft Main Hull Structural Response Subjected to Shockwave from Underwater Explosion, Advances in Engineering Research, Vol.52, pp.136-139.
  5. Tso-Liang Teng, Cho-Chung Liang, Thanh-Tung Tran, 2016, Development and Validation of a Finite Element Model for Road Safety Barrier Impact Tests, Simulation: Transactions of the Society for Modeling and Simulation International, Vol.92, No.6, pp.565-578. [SCI, EI]
  6. Tso-Liang Teng, Cho-Chung Liang, Tuan-Anh Vu, 2016, Bumper shape design for pedestrian safety, Journal of Mechanical Science and Technology, Vol.30, No.7, pp.3243-3251. [SCI, EI]
  7. Ching-Yu Hsu, Cho-Chung Liang, Tso-Liang Teng and Hai-Anh Nguyen, 2016, The dynamic responses of the submersible vehicle mast with different cross-sectional shapes subjected to underwater explosion, MATEC Web of Conferences, Vol. 54, No.11006.
  8. Tso-Liang Teng, Cho-Chung Liang, Ching-Yu Hsu, Chien-Jong Shih, Thanh-Tung Tran, 2016, Impact Performance of W-beam Guardrail Supported by Different Shaped Posts, International Journal of Mechanical Engineering and Applications, Vol.4, No.2, pp. 59-64.
  9. Hung-Yu Huang, Tso-Liang Teng, Cho-Chung Liang, 2016, Lower Extremity Injuries of Volleyball Players during Moving Spike Landing, Americal Journal of Sports Science, Vol.4, No.1, pp.10-17.
  10. Tso-Liang Teng, Cho-Liang Liang, Van-Hai Nguyen, 2016, Assessment of a Bicycle Helmet Liner with Semispherical Cones, Proceedings of Institution of Mechanical Engineers, Journal of Materials: Design and Applications-Part L, Vol.230, No.1, pp.344-352. [SCI, EI]
  11. Hung-Yu Huang, Tso-Liang Teng, Cho-Chung Liang, 2015, Volleyball Injuries: a Survey of Injuries among Male Players of the Chinese Taipei National Volleyball Team, Americal Journal of Sports Science, Vol.3, No.6, pp.109-114.
  12. Tso-Liang Teng, Cho-Chung Liang, Thanh-Tung Tran, 2015, Effect of various W-beam guardrail post spacings and rail heights on safety performance, Advances in Mechanical Engineering, Vol.7, No.11, pp.1-16. [SCI, EI]
  13. Zi-peng Zhang, Chiu-Wen Lin, Tso-Liang Teng, Ching-Yu Hsu, Cho-Chung Liang, Yang Wang and Chien-Jong Shih, 2015, Analysis of the energy absorption capacity of vehicle front components in crash, Applied Mechanics and Materials, Vols. 799-800, pp.808-813. [EI]
  14. Ching-Yu Hsu, Tso-Liang Teng, Cho-Chung Liang, Hai-Anh Nguyen and Chien-Jong Shih, 2015, The study on the dynamic response of cylindrical pressure hull on the different shock loading empirical formula, Applied Mechanics and Materials, Vols. 799-800, pp.604-609. [EI]
  15. Cho-Chung Liang, Ching-Yu Hsu, Tso-Liang Teng, Chao-Chun Hsu, 2015, Structural Responses of Ships Subjected to Bulk Cavitation Induced by Underwater Explosions, Journal of Science and Engineering Technology, Vol. 11, No. 2, pp.1-16.
  16. Ching-Yu Hsu, Cho-Chung Liang, Tso-Liang Teng, Anh-Tu Nguyen, 2014, A numerical study on the underwater explosion bubble pulsation and collapse process, Ocean Engineering, Vol. 81, pp.29-38. [SCI, EI].
  17. Tso-Liang Teng, Cho-Liang Liang, Van-Hai Nguyen, 2014, Innovative Design of Bicycle Helmet Liners, Proceedings of Institution of Mechanical Engineers, Journal of Materials: Design and Applications-Part L, Vol.228, No. 4, pp.341~351. [SCI, EI]
  18. Ching-Yu Hsu, Cho-Chung Liang, Tso-Liang Teng, Qi-Da Xie, 2014, Shock Resistant Analysis of Radar Mount and Diesel-Electric Engine Mount of Submarine, Journal of Taiwan Society of Naval Architects and Marine Engineers, Vol.33, No.3, pp.145~154. [EI]
  19. Ching-Yu Hsu, Cho-Chung Liang, Tso-Liang Teng, Chia-Wei Chang, 2014, The Effect of Roundness on the Buckling Strength for the Submerged Pressure Hull, Applied Mechanics and Materials, Vols. 644-650, pp. 5133-5137. [EI]
  20. Ching-Yu Hsu, Tso-Liang Teng, Cho-Chung Liang, Wu-Chang Kuo, Chien-Jong Shih, Van-Hai Nguyen, 2014, Numerical Simulation of Helmeted Headform Drop Test Based on the EN1078 Standard, Applied Mechanics and Materials, Vols. 644-650, pp. 798-802. [EI]
  21. Chiu-Wen Lin, Han-Ming Tseng, Tso-Liang Teng, 2014, Stability and Large Deformation of 2-D Laminate Circular Thin Curved Beams, Applied Mechanics and Materials, Vols. 644-650, pp. 5146-5150. [EI]
  22. Zi-peng Zhang, Gui-fan Zhao, Tso-Liang Teng, Yang Wang, 2014, Analysis and Application of the Impact Absorption Behavior of the Composite Tube, Applied Mechanics and Materials, Vols.470, pp.510-515. [EI]
  23. Tso-Liang Teng, Cho-Chung Liang and Chien-Lung Chuang, 2014, Comparative Study of Full-Scale Side Impact Test Regulation, Journal of vehicle engineering, No.11, pp.1-6.
  24. Shih, C. J., Teng, T. L., Chen, S. K., 2014, A Niche-Related Particle Swarm Meta-Heuristic Algorithm for Multimodal Optimization, Lecture Notes in Electrical Engineering, Vol. 293, Chapter 39, pp. 313- 321.
  25. Tso-Liang Teng, Cho-Chung Liang, Chien-Jong Shih and Manh-Trung Nguyen, 2013, Design of Car Hood of Sandwich Structures for Pedestrian Safety, International Journal of Vehicle Design. Vol.63, No.2/3, pp.185 - 198 [SCI, EI]
  26. Tso-Liang Teng, Cho-Chung Liang, B. C. Shen and K. M. Chen, 2013, Analysis of spray pattern of isotropic schemes KE-Rod warhead, Journal of C. C. I. T., Vol.42, No.2, pp.219~228. [EI]
  27. Tso-Liang Teng, Cho-Chung Liang and Bo-Xiang Hu, 2013, Calibration of Finite Element Model of Hybrid Ⅲ 5% Dummy, Journal of C. C. I. T., Vol.42, No.2, pp.239~250. [EI]
  28. Ching-Yu Hsu, Cho-Chung Liang, Tso-Liang Teng, Anh-Tu Nguyen, 2013, A numerical study on high-speed water jet impact, Ocean Engineering Journal, Vol. 72, pp.98-106. [SCI, EI]
  29. Tso-Liang Teng, Cho-Chung Liang, Chien-Jong Shih, Van-Hai Nguyen, 2013, Design and Analysis of Bicycle Helmet with Impaxx Foam Liner, Advance Materials Research, Vols. 706~708, pp. 1778-1781. [EI]
  30. Cho-Chung Liang, Tso-Liang Teng, Ching-Yu Hsu, Anh-Tu Nguyen, 2013, A numerical study of underwater explosion bubble, Advance Materials Research, Vols. 706~708, pp. 1734-1737. [EI]
  31. Chien-Jong Shih, Tso-Liang Teng, Cho-Chung Liang, and Yong-An Huang, 2013, Optimum Slide-way Structural Design for A New Polarized Scattering Instrument, Advance Materials Research, Vols. 706~708, pp. 888-891. [EI]
  32. Tso-Liang Teng, Cho-Liang Liang, Van-Hai Nguyen, 2013, Design of Dual Layer Liner with Deformable Semi-Spherical Convex for Bicycle Helmet, Applied Mechanics and Materials, Vols.284-287, pp.681-686. [EI]
  33. Tso-Liang Teng, Cho-Liang Liang, Van-Hai Nguyen, 2013, Development and Validation of Finite Element Model of Helmet Impact Test, Proceedings of Institution of Mechanical Engineers Part L-Journal of Materials : Design and Applications, Vol.227, No.1, pp.82-88. [SCI, EI]
  34. C. P. Peng and T. L. Teng, 2012, Study of Dynamic Response of the Pilot's Head During Ejection Events, Journal of C. C. I. T. , Vol.41, No.2, pp.149-160. [EI]
  35. T. L. Teng, Cho-Chung Liang, C. P. Peng, 2012, Kane’s Method Applied to the Simulation of a Vehicle Occupant in Side Impact, Proceedings of the Institution of Mechanical Engineers, Part K, Journal of Multi-body Dynamics, Vol.226, No.3, pp.183-196. [SCI, EI]
  36. Cho-Chung Liang, Tso-Liang Teng, Shih-Hsien Yang and Hsien-Tsung Lin, 2012, Analysis of Hydro-Pneumatic Suspension System for Heavy-duty Wheeled Vehicle, Journal of Vehicle Engineering, Vol.9. pp.1-24.
  37. Tso-Liang Teng, Cho-Chung Liang, Hung-Yu Huang and You-Lin Chen, 2012, Effect of Vehicle Seat on Neck Injury in Rear Impact, Advance Materials Research, Vols. 538~541, pp. 2995-2998. [EI]
  38. Tso-Liang Teng, Cho-Chung Liang, Chien-Jong Shih and Van-Hai Nguyen, 2012, Simulation of Bicycle Helmet Impact Test Based on the CPSC Standard, Advance Materials Research, Vols. 538~541, pp. 744-747. [EI]
  39. Tso-Liang Teng, Cho-Chung Liang, Chien-Jong Shih and Bo-Xiang Hu, 2012, Effect of Sitting Posture on the Protection Performance of the Airbag, Journal of Vehicle Engineering, Vol.9. pp.25-38.
  40. Chien-Jong Shih, Ting-Hao Chang and Tso-Liang Teng, 2012, An intake three-pipeline model using experimental optimization for a small engine, Advance Materials Research, Vols. 421, pp. 683-686. [EI]
  41. T. L. Teng and Van-Luc Ngo, 2012, Redesign of Vehicle Bonnet Structure for Pedestrian Safety, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol.226, No.1, pp70~84. [SCI, EI]
  42. Tso-Liang Teng, Cho-Chung Liang , Chien-Jong Shih and Manh-Trung Nguyen, 2011, Study of Carbon Fiber/Polycarbonate (CF/PC) Material Sandwich Structure for Vehicle Hood, Advance Materials Research, Vols. 287-290, pp. 472-476. [EI]
  43. Tso-Liang Teng, Cho-Chung Liang, Chien-Jong Shih and Da-An Fung, 2011, Study of Crash Acceleration Curves on the Side-Impact Test, Advance Materials Research, Vols. 230-232, pp. 1335-1339. [EI]
  44. T. L. Teng, C. H. Wu and Zi-peng Zhang, 2011, Numerical Simulation of Side Impact Crashes, Information Technology Journal, Vol.10, No.7, pp.1462~1467. [EI]
  45. Zhao Gui-fan, Cui Dong and Tso-Liang Teng, 2011, The pedestrian protection efficacy of sandwich material engine hood, Journal of Harbin Institute of Technology, Vol. 43, No. 1, pp. 125-129 [EI]
  46. Tso-Liang Teng, Shao-Feng Dai and Zhe-Gang Xu, 2011, Simulation Analysis of Sled Test of Frontal Airbag, Journal of Science and Engineering Technology, Vol.7, No.1, pp.39~46.
  47. T. L. Teng and Van-Luc Ngo, 2011, Analyzing Pedestrian Head Injury to Design Bonnet Friendliness with Pedestrian, International Journal of Automotive Technology, Vol.12, No.2, pp.213~224. [SCI, EI]
  48. G. F. Zhao, Z. P. Zhang and T. L. Teng, 2011, Finite Elements Analysis on the Impact Absorption Behavior of Composite Vehicle Longeron, Advance Materials Research, Vols.183-185, pp.1913~1917. [EI]
  49. G. F. Zhao, T. L. Teng and D. Cui, 2011, Study on the Head Impacting Properties of Foam Composite Material Engine Hood, Advance Materials Research, Vols.156-157, pp.303~306. [EI]
  50. T. L. Teng, Van-Luc Ngo and T. H. Nguyen, 2010, Design of Pedestrian Friendliness Vehicle Bumper, Journal of Mechanical Science and Technology, Vol.24, No.10, pp.2067~2073. [SCI, EI]
  51. T. L. Teng and Van-Luc Ngo, Jan. 2010, Optimization of Bonnet Thickness with respect to Pedestrian Safety, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol.244, pp.1513-1526. [SCI, EI]
  52. T. L. Teng and Kai-Wen Zheng, 2010, Optimal Design of Road Bicycle Handlebar, Journal of Mechanical Engineering, Vol.46, No.21, pp.158-164. [EI]
  53. Tso-Liang Teng and Zhe-Gang Xu, Apr. 2010, Simulation of Static and Dynamic Test of Frontal Airbag, Journal of vehicle engineering, Vol.7, pp.1-14.
  54. T. L. Teng, Trung-Kien Le and Van-Luc Ngo, 2010, Injuries Analysis of Pedestrian in Collisions Using Pedestrian Deformable Model, International Journal of Automotive Technology, Vol.11, No. 2, pp.187-195. [SCI, EI]
  55. T. L. Teng and T. H. Nguyen, 2010, Assessment of Pedestrian Friendliness of a Vehicle Using Subsystem Impact Tests, International Journal of Automotive Technology, Vol.11, No. 1, pp.67-73. [SCI, EI]
  56. T. L. Teng and Trung-Kien Le, 2009, Development and Validation of Pedestrian Deformable Finite Element Model, Journal of Mechanical Science and Technology, Vol.23, No.8, pp.2268~2276. [SCI, EI]
  57. T. L. Teng, and Qui-An Lei, 2009, The Establishment and Analysis of Numerical Model of Rollover Test, Journal of vehicle engineering, Vol.6, p.1~15.
  58. T. L. Teng, Y. A. Chu, F. A. Chang and B. C. Shen, Oct. 2008, Penetration Resistance of Steel Fiber Reinforced Concrete Containment Structure to High Velocity Projectile, Computers and Concrete, Vol.5, No.6, pp.509~524. [SCI, EI]
  59. T. L. Teng, F. A. Chang, Y. S. Liu and C. P. Peng, 2008, Analysis of Dynamic Response of Vehicle Occupant in Frontal Crash Using Multibody Dynamics Method, Mathematical and Computer Modelling, Vol.48, pp.1724~1736. [SCI, EI]
  60. Ming-Jia Zhou and T. L. Teng, 2008, The Optimal Design of the Frame of Treadmill, Journal of Science and Engineering Technology, Vol.4, No.4, pp.7~15.
  61. T. L. Teng and T. H. Nguyen, 2008, Crashworthiness Evaluation of Side-Door Beam of Vehicle, Technische Mechanik, Vol.28, No.3, pp.268~278.
  62. T. L. Teng and P. H. Chang, 2008, Numerical and Experimental Investigations on the Fatigue Life Evaluation of the Butt-Welded Joints, Metals and Materials International, Vol.14, No.3, pp.361~372. [SCI, EI]
  63. T. L. Teng and T. H. Nguyen, 2008, Development and Validation of FE Models of Impactor for Pedestrian Testing, Journal of Mechanical Science and Technology, Vol.22, No.9, pp.1660~1667. [SCI, EI]
  64. T. L. Teng, and D. A. Fung, 2008, Study of Frontal Vehicle Crash Pulses, Journal of vehicle engineering, Vol.5, pp.35~53.
  65. T. L.Teng, T. M. Shih and C. C. Lu, Oct. 2008, Effect of Design Parameters on the Anti-penetration Properties of Space Armor, Structural Engineering and Mechanics, an International Journal. Vol.28, No.6, pp.715~725. [SCI, EI]
  66. T. L. Teng, Y. A. Chu, F. A. Chang and B. C. Shen, 2008, Development and validation numerical model of steel fiber reinforced concrete subject to high velocity impact, Computational Materials Sciences, Vol. 42, No.1, pp. 90~99. [SCI, EI]
  67. T. L. Teng, Y. A. Chu, F. A. Chang, D. S. Cheng and B. C. Shen, 2007, Development and Comparison Analysis Methodology of Steel Fiber Reinforced Concrete Structure, Journal of C. C. I. T., Vol. 35, No.2. pp.1~11.[EI]
  68. T. L. Teng, Y. A. Chu, F. A. Chang, D. S. Cheng and B. C. Shen, 2007, Effect of Liners’ Design Parameters on the Penetration Properties of Explosively Formed Projectile, J. of Explosives and Propellants, Vol. 23, No.1. pp.25~42.
  69. T. L. Teng, H. W. Lan and S. M. Yang, 2007, Comparative Studies of Finite Element Model of Frontal Impact Dummy, Information Technology Journal, Vol.6, No.5, pp.711~717. [EI]
  70. T. L. Teng, K. C. Chang and C. H. Wu, 2007, Development and Validation of Side-Impact Crash and Sled Testing Finite Element Models, Vehicle System Dynamics, Vol.45, No.10, pp.925-937. [SCI, EI]
  71. T. L. Teng, C. L. Chuang and S. W. Wang, 2007, The Establishment of EuroSID Numerical Model, Journal of Science and Engineering Technology, Vol.3, No.3, pp.1-11.
  72. T. L. Teng, W. Y. Tsai and S. W. Wang, 2007, The Development and Analysis of Curtain Airbag Numerical Mode, the Journal of vehicle engineering, Vol.4, pp.37~54.
  73. T. L. Teng, Y. A. Chu, F. A. Chang and B. C. Shen, 2007, Design and Implementation of High Velocity Projectile Generator, Combustion, Explosion, and Shock Waves, Vol.43, N0.2, pp.123-131. [SCI, EI]
  74. T. L. Teng, and K. T. Chou, 2007, Design and Implementation of Pressure Measurement System for Pressure Garments, Information Technology Journal, Vol. 6, No.3, pp.359~362. [EI]
  75. T. L. Teng, F. A. Chang, Y. S. Liu and C. P. Peng, 2006, Analysis of Human Body Response to Vibration Using Multibody Dynamics Method, Proceedings of the Institution of Mechanical Engineers, Part K, Journal of Multi-body Dynamics, Vol.220, No.3, pp.191~202. [SCI, EI]
  76. T. L. Teng, Y. C. Wu, P. H. Chang, K. C. Chiang and C. F. Chiang, 2006, Design and Analysis of the Interface Structures of Weapon System on Armored Vehicle, Journal of C. C. I. T., Vol. 35, No.1, pp.43-52. [EI]
  77. T. L. Teng, C. H. Wu and S. W. Wang, 2006, The Injury Analysis of Occupant in Side Impact Collisions, Journal of Science and Engineering Technology. Vol.3, No.1, pp.33-41.
  78. T. L. Teng, and K. T. Chou, 2006, The Measurement and Analysis of Pressure Generated by Burn Garment, J. of Medical and Biological Engineering. Vol.26, No.4. pp.155~159.[EI]
  79. T. L. Teng, C. H. Wu and S. W. Wang, 2006, The Study of Numerical Model for Side Impact Test, Journal of vehicle engineering, Vol.3, No.3, pp.1~15.
  80. T. L. Teng, C. M. Yu and Y. Y. Wu, 2005, Optimal Design of Filament Wound Composite Pressure Vessels, Mechanics of Composite Materials, Vol.41, No.4, pp.489~498. [SCI, EI]
  81. T. L. Teng and P. H. Chang, 2005, Analysis of Fatigue damage and Prediction of Life for Welded Joints, Transaction of the Aeronautical and Astronautical Society of the Republic of China, Vol.37, No.4, pp.301~316. [EI]
  82. T. L. Teng and C. H. Liu, 2005, The Safety Assessment of Railway Vehicle Running on a Curved Track, Journal of traffic science, Vol. 5, No.1, p.111~129.
  83. T. L. Teng and K. J. Lee, 2005, Development of Estimation Software for the Vehicle’s Velocity in Accident, Journal of traffic science, Vol. 5, No.1, p.147~164.
  84. T. L. Teng and K. J. Lee, 2005, The Estimation of Stiffness Coefficients on Damage Algorithms, Journal of vehicle engineering, Vol.2, pp.65-80.
  85. T. L. Teng and P. H. Chang, 2005, Fatigue Life Prediction of Gun Mount Assembly for Automatic Gun, Journal of C. C. I. T. , Vol.33, No.2, pp.137-154. [EI]
  86. T. L. Teng, Y. A. Chu, F. A. Chang and B. C. Shen, 2005, Perforation Resistance of Reinforced Concrete Containment Structures, the Annals of Nuclear Energy, Vol.32, pp.281-298. [SCI, EI]
  87. T. L. Teng, Y. A. Chu, F. A. Chang and H. S. Chin, 2005, Numerical Analysis of Oblique Impact on Reinforced Concrete, Journal of Cement and Concrete Composites. Vol.27, pp.481-492. [SCI, EI]
  88. C. C. Liang, M. F. Yang, P. W. Wu and T. L. Teng, 2005, Resistant performance of perforation of multi-layered targets using an estimation procedure with marine application, Ocean Engineering, Vol.32, pp.441-468. [SCI, EI]
  89. T. L. Teng and C. C. Wu, 2004, Human Injuries as a Reconstruction Parameter in Traffic Accident, Journal of Technology. Vol.19, No.3, pp.231-238.
  90. T. L. Teng, F. A. Chang, C. P. Peng and B. W. Yang, 2004, The Study of Head and Neck Injury in Traffic Accidents, Journal of Applied Sciences, Vol.4, No.3, pp449-455.
  91. T. L. Teng, Y. A. Chu, F. A. Chang and H. S. Chin, 2004, Calculating the Elastic Moduli of Steel Fiber Reinforced Concrete using a Dedicated Empirical Formula, Journal of Computational Materials Science, Vo.31, pp.337-346. [SCI, EI]
  92. T. L. Teng, Y. A. Chu, F. A. Chang and H. S. Chin, 2004, Simulation Model for Impact on Reinforced Concrete, Joural Cement and Concrete Research, Vol.34, pp.2067-2077. [SCI, EI]
  93. T. L. Teng, Y. A. Chu, F. A. Chang and H. S. Chin, 2004, Application of the Equivalent Inclusion Method on Material Strength Evaluation and Structural Analysis for Steel-Fiber Reinforced Concrete, Journal of C. C. I. T., Vol.33, No.1, pp.107-117. [EI]
  94. T. L. Teng, C. C. Liang, Y. Y. Wu and H. W. Chen, 2004, The Effect of Design Parameters on the Slippage Tendency in Domes with Plane Filament-Winding, Transaction of the Aeronautical and Astronautical Society of the Republic of China,Vol.36, No.2, pp151-152. [EI]
  95. T. L. Teng, T. M. Shis and C. C. Wu, 2004, A Finite Element Model for a Frontal Impact Dummy, Journal of Technology, Vol.19, No.1, pp.31-38.
  96. T. L. Teng and P. H. Chang, 2004, Numerical and Experimental Investigations on the Residual Stresses of the Butt-Welded Joints, J. of Computational Materials Science, Vol. 29, No. 4, pp.511-522. [SCI, EI]
  97. T. L. Teng, F. A. Chang, C. P. Peng and B. W. Yang, 2004, The Analysis of Neck Injury of Occupant in Rear-End Crashes, Journal of Medical and Biological Engineering, Vol.24, pp.13-18. [EI]
  98. T. L. Teng, F. A. Chang, C. P. Peng and C. H. Wu, 2004, The Establishment of SID Numerical Model, Journal of Medical and Biological Engineering, Vol.24, pp.19-28. [EI]
  99. T. L. Teng and P. H. Chang, 2004, Fatigue Life Prediction for a T-joint fillet welds, Journal of SNAME R.O.C., Vol.23, No.1, pp.1-11. [EI]
  100. T. L. Teng, C. C. Liang and C. C. Lu, 2004, The Analysis of Anti-Penetration Properties of Space Armor on Ship, Journal of SNAME R.O.C. , Vol.23, No.1, pp.39-47. [EI]
  101. T. L. Teng and P. H. Chang, 2004, Effect of Residual Stresses on Predicting Fatigue Crack Initiation Life for Butt Joints, Journal of Materials Processing Technology. Vol.145, N0.3, pp.325-335 [SCI, EI]
  102. T. L. Teng, Y. A. Chu, F. A. Chang and H. S. Chin, 2003, The study of failure behavior in steel fiber RC plate under low speed impact, Journal of Mechanic. Vol.19, N0.2, pp.125-141. [SCI, EI]
  103. T. L. Teng, Y. A. Chu, C. Chung and H. S. Chin, 2003, The Study of Modifying the Premature Analysis of Modeling, Journal of Mechanic. Vol.19, N0.2, pp.79-89. [SCI, EI]
  104. T. L. Teng and P. H. Chang, 2003, Fatigue Crack Initiation Life for a Flat Plate with a Central Hole, Journal of C. C. I. T., Vol. 32, No.1, pp 45 –58. [EI]
  105. T. L. Teng, Y. A. Chu and H. S. Chin and H. S. Chin, 2003, The Dynamic Analysis of Nuclear Waste Cask under Impact Loading, Annals of Nuclear Energy, Vol. 30, No.14, pp 1473 – 1485. [SCI, EI]
  106. T. L. Teng , C. P. Fung and P. H. Chang, 2003, Effect of Residual Stresses on Fatigue Life of Butt Joints using Thermal Elasto-Plastic and Multiaxial Fatigue Theory, Engineering Failure Analysis, Vol. 10, pp 131 – 151. [SCI, EI]
  107. T. L. Teng, C. C. Liang and T. H. Yen, 2003, The Structure Shape Design of Vertical Launching Canister on Ship, J. of SNAME R.O.C., Vol. 22, No.1, pp 39 – 45. [EI]
  108. T. L. Teng, P. H. Chang and W. C. Tseng, 2003, Effect of Welding Sequence on Residual Stresses, J. of Computer and Structure, Vol. 81, No.5, pp 273 – 286. [SCI, EI]
  109. T. L. Teng, Y. A. Chu and H. S. Chin, 2003, The Application of Equivalent Inclusion Method in Reinforced Concrete Structure Analyses, Journal of Mechanic, Vol. 19, No.1, pp 17 – 28. [EI]
  110. C. C. Liang, T. L. Teng and C. Y. Yu, 2003, Biodynamic Response of Shipboard Human Body to Vertical Shock Motion, J. of SNAME R.O.C. , Vol. 22, No.2, pp 73 – 86. [EI]
  111. T. L. Teng and P. H. Chang, 2002, Effect of Weld Geometry and Residual Stresses on Fatigue in Butt-Welded Joints, International J. of Pressure Vessel and Piping, Vol.79, pp.467-482. [SCI, EI]
  112. T. L. Teng and P. H. Chang, 2002, The Prediction of Fatigue Life in weldments Based on Thermal Elasto-Plastic and Multiaxial Fatigue Theory, Transaction of the Aeronautical and Astronautical Society of the Republic of China , Vol.34, No.4, pp.319-329. [EI]
  113. T. L. Teng, Y. A. Chu and M. C. Lee, 2002, The Analysis on Penetration Behavior of Protective Structure Subjected to Impact, J. of Explosives and Propellants, Vol.18, No.1, pp.63-82.
  114. T. L. Teng and P. H. Chang, 2002, The Effect of Hole Geometry on Fatigue Strength of a Flat Plate, Journal of C. C. I. T. , Vol.30, No.2, pp.37-50. [EI]
  115. T. L. Teng and C. C. Lin, 2001, Thermal Elasto-Plastic Analysis in Butt Welded Plates, Computer Modeling and Simulation in Engineering. (Accepted for publication) [SCI, EI]
  116. T. L. Teng and N. K. Hu, 2001, Analysis of Damping Characteristics for Viscoelastically Laminated Beams, J. Computer Methods in Applied Mechanics and Engineering, 190, pp.3881-3892. [SCI, EI]
  117. T. L. Teng, P. H. Chang and W. C. Yang, 2001, Analysis of Residual Stresses and Distortions in T-joint Fillet Welds, International J. of Pressure Vessel and Piping, Vol.78, pp.523-538. [SCI, EI]
  118. C. Chung, Y. A. Chu and T. L. Teng, 2001, The Study on Premature Analysis with Uniaxial-strain Method, J. of Explosives and Propellants, Vol.17, No.2, pp.13-25.
  119. T. L. Teng, Y. S. Tai, and C. Chung, 2001, The Behavior of the Cartridge Case and Chamber During Firing, Journal of Technology, Vol.16, No.3, pp.453-463.
  120. T. L. Teng, T. Y. Heh, M. J. Shieh and C. Chung, 2001, The Design and Analysis of Oleo-Pneumatic Shock Absorber, Journal of Hsiuping, Vol. 2, pp.173-196.
  121. T. L. Teng, W. C. Tseng and P. H. Chang, 2001, FEM Analysis of I Beam Connections in Fillet Welds, Journal of C. C. I. T. , Vol.29, No.2, pp.53-64. [EI]
  122. T. L. Teng and N. K. Hu, 2001, The Characteristics of Free Layer Damping Structures, Journal of C. C. I. T., Vol.29, No.2, pp.65-74. [EI]
  123. T. L. Teng and T. H. Yen, 2001, The Structure Strength Analysis of Virtical Launching Systems on Ship Subjected to underwater Shock and Bad Sea-state, J. of SNAME R.O.C. , Vol.20, No.1, pp.17-27. [EI]
  124. T. L. Teng, P. H. Chang and H. C. Ko, 2000, Finite Element Analysis of Circular Patch Welds, International J. of Pressure Vessel and Piping, Vol. 77, pp.643-650. [SCI, EI]
  125. T. L. Teng , C. P. Peng and C. Chung, 2000, A Study on the Application of Fuzzy Theory to Structural Control, J. Computer Methods in Applied Mechanics and Engineering, 189, pp.439-448. [SCI, EI]
  126. T. L. Teng and T. H. Yen, 2000, Analysis of Underwater Shock Considered Fluid-Structure Interaction, J. of Explosives and Propellants,.Vol.16, No.2, pp.29-44.
  127. T. L. Teng, Y. S. Tai , C. S. Liu and W. H. Lai, 2000, Strucyural Dynamic Analysis of Cartridge Case During Firing, J. of Explosives and Propellants, Vol.16, No.1, pp.29-42.
  128. T. L. Teng and C. J. Lin, 1999, The Study of Modifying the Boundary Conditions of Structural Modeling using Method, Journal of C. C. I. T., Vol.28, No.1, pp.39-49. [EI]
  129. T. L. Teng and W. H. Cheng, 1999, A Effective Control System of Thrust and Moment Modulation for a Dynamically Positioned Vessel, Marine Geodesy, Vol.22, No.4, pp.211-227. [SCI, EI]
  130. T. L. Teng, C. C. Liang and C. C. Liao, 1999, Nonlinear Forced Vibration Analysis of the Rectangular Plates by the Fourier Series Method, Computational Mechanics, Vol.23, No,1, pp.1-7. [SCI, EI]
  131. C. C. Liang, T. L. Teng , W. H. Cheng, 1999, A Study of a Short-Baseline Acoustic Positioning System for Offshore, Marine Geodesy, Vol.22, No.1, pp.19-30. [SCI, EI]
  132. T. L. Teng, P. H. Chang, 1999, Welded Thermo-Elasto-Plastic Analysis in Thick Specimens, Transaction of the Aeronautical and Astronautical Society of the Republic of China, Vol.31, N0.2, pp.77-83. [EI]
  133. S. C. Lin, L. P. Tsao and T. L. Teng, 1999, The Three Dimension Analysis of Attack Tactics on Fighter to Missile, Journal of C. C. I. T., Vol. 27, No. 2, pp.11-20. [EI]
  134. T. L. Teng and C. H. Wu, 1999, Blast Resistant Study on Ship’s Structure, J. of SNAME R.O.C., Vol.18, No.1, pp.57-68. [EI]
  135. T. L. Teng and C. C. Lin, 1999, A Study on Improvement of Residual Stresses by Welding, Journal of C. C. I. T., Vol. 27, No. 2, pp.43-53. [EI]
  136. T. L. Teng, C. H. Wu and C. H. Lin, 1998, The Effect of Blast on Ship’s Structures, J. of Explosives and Propellants, Vol. 14, No. 2, pp.31-45.
  137. T. L. Teng and H. C. Ko, 1998, An Anaysis of Residual Stresses During Repair Welding, Journal of Technology, Vol.13, No.3, pp.379-387.
  138. T. L. Teng and C. C. Lin, 1998, The Effects of Welding Conditions on Residual Stresses Due to Butt Welds, Journal of Pressure Vessels and Piping, Vol.75, No.12, pp.857-864. [SCI, EI]
  139. T. L. Teng and W. H. Lai, 1998, A Study of Diving Depth on Deep-Diving Submersible Vehicle, Journal of Pressure Vessels and Piping, Vol.75, pp.447-457. [SCI, EI]
  140. C. H. Lin, T. L. Teng and C. Chung, 1998, Simulation and Experiment of Cutting Effect for Linear Shaped Charge, J. of Explosives and Propellants, Vol. 14, No. 1, pp.63-71.
  141. T. L. Teng and P. H. Chang, 1998, Three-Dimensional Thermomechanical Analysis in Circumferentially welded Thin-Walled Pipes, Journal of Pressure Vessels and Piping, Vol.75, No.3, pp.237-247. [SCI, EI]
  142. T. L. Teng and C. P. Peng, 1997, The Study on Active Structural Control Laws, Journal of C. C. I. T.,Vol.26, No.2, pp.103-115. [EI]
  143. T. L. Teng and P. H. Chang, 1997, A Study of Residual Stresses in a Multi-Pass Girth-Butt Welded Pipes., J. of Pressure Vessels and Piping, Vol.74, No.1, pp59-70. [SCI, EI]
  144. T. L. Teng, C. C. Liang and F. A. Chang, 1997, The Realization of Boundary Conditions in the Vibration Analysis of Plates, J. of the Franklin Institute , Vol. 335, No.5, pp.799-812. [SCI, EI]
  145. T. L. Teng, C. C. Liang and C. C. Liao, 1996, Transient Dynamic Large Deflection Analysis of Panel Structure under Blast Loading, JSME Internation Journal, Vol.39, No.4, pp.591-597. [SCI, EI]
  146. T. L. Teng, C. C. Liang and C. C. Liao, 1996, Optimal Design of a Dynamic Absorber using Polymer-laminated Steel Sheets, Computers & Structures, Vol.60, No.6, pp.981-988. [SCI, EI]
  147. T. L. Teng, C. C. Liang and L. P. Tsao, 1996, The Design Implementation of the Barker Code Pulse Compression System, J. of SNAME R.O.C., Vol.15, No.2, pp.27-34. [EI]
  148. T. L. Teng and K. H. Yu, 1995, A Study of Dynamic Absorber using Damping Vibration Steel Sheets, J. of SNAME R.O.C., Vol.14, No.1, pp.15-31. [EI]
  149. C. C. Liang, C. C. Liao and T.L. Teng, 1994, A Galerkin Perburation Method for Nonlinear Dynamic Response of Ship Panel under Blast Loading, J. of SNAME R.O.C., Vol.13, No.1, pp.79-98. [EI]
  150. T. L. Teng, 1994, Optimal Design of Unstayed Polemast on Navy Surface Ship, Computer & Structures, Vol.50, No.3, pp.317-323. [SCI, EI]
  151. C. C. Liang, C. C. Liao, T. L. Teng and Y. Y. Jing, 1992, A Study of Strain Estimation in Stream Generator Dented Tubes, J. of SNAME R.O.C., Vol.11, No.2, pp.41-58. [EI]
  152. W. H. Chen and T. L. Teng, 1988, Ultrasonic Non-destractive Testing using Barker Code Pulse Compression Techniques, Ultrasonics, Vol.26, pp.23-26. [SCI, EI]
  153. Tso-Liang Teng, Cho-Chung Liang, Ching-Yu Hsu, Chien-Jong Shih, Thanh-Tung Tran, 2016, Effect of Soil Properties on Safety Performance of W-beam Guardrail, 2016 International Conference on Advanced Materials Science and Environmental Engineering, June 26-27, 2016, Chiang Mai, Thailand.
  154. Ching-Yu Hsu, Cho-Chung Liang, Tso-Liang Teng, Hai-Anh Nguyen, 2016, A Numerical Study of Hovercraft Main Hull Structural Response Subjected to Shockwave from Underwater Explosion, 2016 International Conference on Advanced Materials Science and Environmental Engineering, June 26-27, 2016, Chiang Mai, Thailand.
  155. Tso-Liang Teng, Cho-Chung Liang, Ching-Yu Hsu, Chien-Jong Shih, Thanh-Tung Tran, 2016, Impact Performance of W-beam Guardrail Supported by Different Shaped Posts, 2016 International Conference on Electrical Engineering, Mechanical Engineering and Automation, Apr.25-26, Hangzhou, China.
  156. Ching-Yu Hsu, Cho-Chung Liang, Tso-Liang Teng and Hai-Anh Nguyen, 2016, The dynamic responses of the submersible vehicle mast with different cross-sectional shapes subjected to underwater explosion, 2016 7th International Conference on Mechanical, Industrial, and Manufacturing Technologies, February 1-3, Cape Town, South Africa.
  157. T. L. Teng, C. Y. Hsu, T. T. Tran and C. C. Lee, 2016, Study of Underwater Vehicle and Equipment with Shock Resistance Devices(Ⅲ), The 28th Conference of Naval Architects and Marine Engineers, March 5-6, Taipei, Taiwan.
  158. C. Y. Hsu, C. C. Liang, T. L. Teng and C. Y. Cheng, 2016, The comparative study for the static and dynamic bulking strength of the harmonic out of roundness cross-section type stiffened cylinder, The 28th Conference of Naval Architects and Marine Engineers, March 5-6, Taipei, Taiwan.
  159. C. Y. Hsu, C. C. Liang, T. L. Teng and K. C. Peng, 2016, The Study of the Dynamic Responses for the LCAC-Like Hovercraft Subjected to the High-Speed Water-jet Loading, The 28th Conference of Naval Architects and Marine Engineers, March 5-6, Taipei, Taiwan.
  160. C. Y. Hsu, C. C. Liang, T. L. Teng, H. A. Nguyen and T. V. Nguyen, 2016, The study for the dynamic response of stiffened cylinder subjected to bubble pulses causing by underwater explosion, The 28th Conference of Naval Architects and Marine Engineers, March 5-6, Taipei, Taiwan.
  161. C. Y. Hsu, C. C. Liang, T. L. Teng, H. A. Nguyen and T. V. Nguyen, 2016, The study of structure damage evaluation of air cushion vehicle subjected to underwater explosion(I), The 28th Conference of Naval Architects and Marine Engineers, March 5-6, Taipei, Taiwan.
  162. Zi-peng Zhang, Chiu-Wen Lin, Tso-Liang Teng, Ching-Yu Hsu, Cho-Chung Liang, Yang Wang and Chien-Jong Shih, 2015, Analysis of the energy absorption capacity of vehicle front components in crash, The 2015 7th International Conference on Mechanical and Electrical Technology (ICMET 2015), July 1-2, 2015, Bali, Indonesia.
  163. Ching-Yu Hsu, Tso-Liang Teng, Cho-Chung Liang, Hai-Anh Nguyen and Chien-Jong Shih, 2015, The study on the dynamic response of cylindrical pressure hull on the different shock loading empirical formula, The 2015 7th International Conference on Mechanical and Electrical Technology (ICMET 2015), July 1-2, 2015, Bali, Indonesia.
  164. Ching-Yu Hsu, Tso-Liang Teng, Cho-Chung Liang, Hai-Anh Nguyen and Chien-Jong Shih, 2015, Underwater shock and bubble pulse responses of a rectangular plate subjected to underwater explosion, The 2015 7th International Conference on Mechanical and Electrical Technology (ICMET 2015), July 1-2, 2015, Bali, Indonesia.
  165. C. Y. Hsu, C. C. Liang, T. L. Teng, C. L. Chen and H. A. Nguyen, 2015, A Study of Dynamic Response for Cylindrical Pressure Hull with T-type Ring Inner or Outter Ribs Subjected to Underwater Explosion Loading, The 23rd National Conference on Sound and Vibration, June 27th, New Taipei City, Taiwan.
  166. C. Y. Hsu, C. C. Liang, T. L. Teng, C. L. Chen and H. A. Nguyen, 2015, Dynamic Reaction of Cylindrical Pressure Hull with Circumferential Sinusoid Cross-Section Out-off-Roundness Type Subjected To UNDEX Loading, The 23rd National Conference on Sound and Vibration, June 27th, New Taipei City, Taiwan.
  167. C. Y. Hsu, C. C. Liang, T. L. Teng, C. L. Chen and S. C. Chen, 2015, A Study on Dynamic Buckling Response for Cylindrical Pressure Hull with Different Types of Ring Inner-Rib, The 27th Conference of Naval Architects and Marine Engineers, March 21-22, Kaohsiung, Taiwan.
  168. T. L. Teng, C. Y. Hsu, T. T. Tung and C. T. Lee, 2015, Study of Underwater Vehicle and Equipment with Shock Resistance Devices(Ⅱ), The 27th Conference of Naval Architects and Marine Engineers, March 21-22, Kaohsiung, Taiwan.
  169. C. Y. Hsu, C. C. Liang, T. L. Teng, C. L. Chen and S. C. Chen, 2015, A Study on Dynamic Buckling Response for Cylindrical pressure hull with T-Type ring Ring Inner or Outter Ribs, The 27th Conference of Naval Architects and Marine Engineers, March 21-22, Kaohsiung, Taiwan.
  170. C. Y. Hsu, C. C. Liang, T. L. Teng and K. C. Peng, 2015, The Study of Dynamic Response for Class LCAC-Like Hovercraft to Strike Different Type Obstacles, The 27th Conference of Naval Architects and Marine Engineers, March 21-22, Kaohsiung, Taiwan.
  171. C. Y. Hsu, C. C. Liang, T. L. Teng and C. L. Chen, 2015, Dynamic Buckling Effect of Cylindrical Pressure Hull with Circumferential Harmonic Cross-Section Out-off-Roundness Type, The 32th National Conference on Mechanical Engineering, December 11-12, Kaohsiung, Taiwan.
  172. C. J. Shih, B. S. Chen and T. L. Teng, 2015, A Fully Imitate Immune System for Multi-Criterions Constrained Structural Engineering Design Optimization, The 39th National Conference on Theoretical and Applied Mechanics, November 20-21, Kaohsiung, Taiwan, R.O.C.
  173. Chien-Jong Shih, Tso-Liang Teng, P. J. Lin, 2014, Double Objective Transformation Strategy Developed as Constraints for Handling for Particle Swarm Optimization, The 9th Cross Strait Conference on Aerospace Engineering, Nov. 18-19, Taipei, Taiwan, R.O.C.
  174. Ching-Yu Hsu, Cho-Chung Liang, Tso-Liang Teng, Hai-Anh Nguyen, 2014, The Study on the Underwater Shock Loading Empirical Formula, The 31th National Conference on Mechanical Engineering, December 6-7, Taichang, Taiwan, R.O.C.
  175. Ching-Yu Hsu, Tso-Liang Teng, Cho-Chung Liang, Wu-Chang Kuo, Chien-Jong Shih, Van-Hai Nguyen, 2014, Numerical Simulation of Helmeted Headform Drop Test Based on the EN1078 Standard, The 2014 3rd International Conference on Advanced Engineering Materials and Architecture Science, July 26-27, Huhhot, Inner Mongolia.
  176. Ching-Yu Hsu, Cho-Chung Liang, Tso-Liang Teng and Chia-Wei Chang, 2014, The Effect of Roundness on the Buckling Strength for the Submerged Pressure Hull, The 2014 3rd International Conference on Advanced Engineering Materials and Architecture Science, July 26-27, Huhhot, Inner Mongolia.
  177. Chiu-Wen Lin, Han-Ming Tseng, Tso-Liang Teng, 2014, Stability and Large Deformation of 2-D Laminate Circular Thin Curved Beams, The 2014 3rd International Conference on Advanced Engineering Materials and Architecture Science, July 26-27, Huhhot, Inner Mongolia.
  178. 徐慶瑜、梁卓中、鄧作樑、張家瑋、彭凱誠,2014,肋骨型式對圓筒殼動態挫曲分析之影響,第二十六屆中國造船暨輪機工程研討會,基隆市,3月15- 16日。
  179. 徐慶瑜、梁卓中、鄧作樑、張家瑋、彭凱誠,2014,不同肋骨型式對圓筒型壓力殼承受水下爆炸引致氣泡脈衝之結構反應研究,第二十六屆中國造船暨輪機工程研討會,基隆市,3月15- 16日。
  180. 徐慶瑜、梁卓中、鄧作樑、蔡品呈、張家瑋,2014,局部失圓圓筒殼承受水下爆震引致震波負荷之圓度效應影響,第二十六屆中國造船暨輪機工程研討會,基隆市,3月15- 16日。
  181. 徐慶瑜、梁卓中、鄧作樑、蔡品呈、張家瑋,2014,加勁平板結構之肋骨型式承受水下爆炸引致主震波 之結構反應研究,第二十六屆中國造船暨輪機工程研討會,基隆市,3月15- 16日。
  182. Zi-peng Zhang, Gui-fan Zhao, Tso-Liang Teng, Yang Wang, 2013, Analysis and Application of the Impact Absorption Behavior of the Composite Tube, The 2013 the 2nd International Conference on Mechanical Engineering, Materials Science and Civil Engineering, Oct. 25-26, Beijing, China.
  183. 林博然、史建中、鄧作樑、鄭向為 (2013),“轉換目標策略的粒子群限制最佳化,” 中國機械工程學會第三十屆全國學術研討會論文集,ID: 1231, 宜蘭大學, 宜蘭縣,12月6- 7日。
  184. 林俊毅、史建中、鄧作樑、胡光宗 (2013),“混合TANA1及TDQA2的近似法最佳化於鋼結構設計,” 中國機械工程學會第三十屆全國學術研討會論文集,ID: 1340, 宜蘭大學, 宜蘭縣,12月6- 7日。
  185. Shih, C. J., Teng, T. L. and Huang, Y. A., 2013, Optimizing the Structure of a Four-axis Polarized Scattering Instrument using a Double-loop Approach, International Symposium on Precision Mechanical Measurements, ISPMM2013), Paper No. PMM13-MM100-50, Guiyang, August 8-12, Guizhou, China.
  186. Shih, C, J., Tsai, C. D. and Teng, T. L., 2013, Genetic based Structural Optimization with Handling Constraints as Additional Objective, Proceedings of 2013 Asian-Pacific Conference on Aerospace Technology and Science (APCATS 2013), Paper No: N01, May 23-26, Sun Moon Lake, Taiwan.
  187. Shih, C. J., Teng, T. L., and Chen, S. K., 2013, A Niche-Related Particle Swarm Meta-Heuristic Algorithm for Multimodal Optimization, International Conference on Intelligent Technologies and Engineering Systems (ICITES 2013), Paper No: O12-03 ICITES2013-259, December 12-14, 2013, Kaohsiung, Taiwan.
  188. Tso-Liang Teng, Cho-Chung Liang, Chien-Jong Shih, Van-Hai Nguyen, 2013, Design and Analysis of Bicycle Helmet with Impaxx Foam Liner, 2013 The 3rd International Conference on Mechatronics and Intelligent Materials, May 18-19, XiShuangBanNa, China.
  189. Cho-Chung Liang, Tso-Liang Teng, Ching-Yu Hsu, Anh-Tu Nguyen, 2013, A numerical study of underwater explosion bubble, 2013 The 3rd International Conference on Mechatronics and Intelligent Materials, May 18-19, XiShuangBanNa, China.
  190. Chien-Jong Shih, Tso-Liang Teng, Cho-Chung Liang, Yong-An Huang, 2013, Optimum Slide-way Structural Design for A New Polarized Scattering Instrument, 2013 The 3rd International Conference on Mechatronics and Intelligent Materials, May 18-19, XiShuangBanNa, China.
  191. Tso-Liang Teng, Cho-Liang Liang, Van-Hai Nguyen, 2012, Design of Dual Layer Liner with Deformable Semi-Spherical Convex for Bicycle Helmet, The 2nd International Conference on Engineering and Technology Innovation, Nov. 2-6, Kaohsiung, Taiwan, R.O.C.
  192. Y. A. Huang, C. J. Shih, T. L. Teng, C. Y. Lin, 2012, Optimum Slide-way Structural Design Used in Supporting Detector for A New Polarized Scattering Instrument, The 29th National Conference on Mechanical Engineering, December 7-8, Kaohsiung, Taiwan, R.O.C.
  193. C. Y. Hsu, C. C. Ling, T. L. Teng, P. C. Tsai, 2012, The Study for the Mechanics Response of the Ship Structure Caused by the Main Shock Wave Loading Produceded by the Underwater Explosion, The 29th National Conference on Mechanical Engineering, December 7-8, Kaohsiung, Taiwan, R.O.C.
  194. Tso-Liang Teng, Cho-Chung Liang , Hui-Min Zhu, 2012, Numerical Simulation of Joint Test for Composite Reinforced Frame, The 17th National Conference on Vehicle Engineering, November 9, Nantou, Taiwan.
  195. Tso-Liang Teng, Cho-Chung Liang and Shao-Feng Dai, 2012, The Effect of Front-end Appearance of the Car on the Pedestrian Injuries, The 36st National Conference on Theoretical and Applied Mechanics, November 16-17, Jungli, Taiwan, R.O.C.
  196. C. Y. Hsu, C. C. Ling, T. L. Teng, J. W. Chang, 2012, Nonlinear Structural Dynamic Response of Circular Cylindrical Shell Subject to High-speed Jet Impact, The 36st National Conference on Theoretical and Applied Mechanics, November 16-17, Jungli, Taiwan, R.O.C.
  197. C. Y. Hsu, C. C. Ling, T. L. Teng, J. W. Chang, 2012, Analysis of Structural Dynamic Response Subject to Huge Cavitation Induced by Underwater Explosions, 2012 SIMULIA Regional User Meeting, November 1-2, Keelung, Taiwan, R.O.C.
  198. C. Y. Hsu, C. C. Ling, T. L. Teng, J. W. Chang, 2012, Structural Dynamic Response of Ship Subject to High-speed Jet Impact, 2012 SIMULIA Regional User Meeting, November 1-2, Keelung, Taiwan, R.O.C.
  199. Chien-Jong Shih, Chun-Yi Lin and Tso-Liang Teng, 2012, Enhanced New Three-point Approximation in Structural Optimization including Singularity Handling, The 8th Cross-straits Conference on Aeronautics and Astronautics, Sep. 3-5, Beijing, China.
  200. Tso-Liang Teng, Cho-Chung Liang, Hung-Yu Huang and You-Lin Chen, 2012, Effect of Vehicle Seat on Neck Injury in Rear Impact, 2012 International Conference on Advances Engineering Materials and Technology, July 6-8, Zhuhai, China.
  201. Tso-Liang Teng, Cho-Chung Liang, Chien-Jong Shih and Van-Hai Nguyen, 2012, Simulation of Bicycle Helmet Impact Test Based on the CPSC Standard, 2012 International Conference on Advances Engineering Materials and Technology, July 6-8, Zhuhai, China.
  202. Tso-Liang Teng, Cho-Chung Liang, Chien-Jong Shih and Manh-Trung Nguyen, 2011, Study of Vehicle Hood for Aluminum Reinforced Polycarbonate Composite Material, 2011 International Conference on Advances in Materials and Manufacturing Processes, December 16-18, Guangxi, China.
  203. Tso-Liang Teng, Cho-Chung Liang , Chien-Jong Shih , Manh-Trung Nguyen, 2011, Assessment of Vehicle Bonnet of Sandwich Structures for Pedestrian Safety, The 28th National Conference on Mechanical Engineering, December 10-11, Taichung, Taiwan, R.O.C.
  204. Tso-Liang Teng, Cho-Chung Liang , Chien-Jong Shih , Yi-Xin Liu, 2011, Application of CFD Inflation Model for Side Airbag, The 16th National Conference on Vehicle Engineering, November 11, Taipei, Taiwan.
  205. Tso-Liang Teng, Cho-Chung Liang , Chien-Jong Shih and Shao-Feng Dai, 2011, Analysis of Trajectory and Injury for Pedestrian-Vehicle Collision, The 35st National Conference on Theoretical and Applied Mechanics, November 18-19, Tainan, Taiwan, R.O.C.
  206. Tso-Liang Teng, Cho-Chung Liang , Chien-Jong Shih , Da-An Fung, 2011, Study of Crash Acceleration Curves on the Side-Impact Test, 2011 International Conference on Frontiers of Manufacturing Science and Measuring Technology, June 23-24, Chongqing, China.
  207. Tso-Liang Teng, Cho-Chung Liang , Chien-Jong Shih and Manh-Trung Nguyen, 2011, Study of Carbon Fiber/Polycarbonate (CF/PC) Material Sandwich Structure for Vehicle Hood, International Conference on Advanced Engineering Materials and Technology, July 29-31, Sanya, China.
  208. G. F. Zhao, Z. P. Zhang and T. L. Teng, 2011, Finite Elements Analysis on the Impact Absorption Behavior of Composite Vehicle Longeron, 2011 International Conference on Environmental Biotechnology and Materials Engineering, Harbin, China.
  209. G. F. Zhao, T. L. Teng and D. Cui, 2010, Study on the Head Impacting Properties of Foam Composite Material Engine Hood, ICAMMP 2010, November 5-8, Guangdon, China.
  210. T. L. Teng, J. S. Wang, G. F. Zhao, J. T. Lai, D. Cui and Z. P. Zhang, 2010, Application and Implementation of Form Compound Strictures, The 27th National Conference on Mechanical Engineering, December 10-11, Taipei, Taiwan, R.O.C.
  211. T. L. Teng, T. A. Wu and M. T. Nguyen, 2010, Effect of Bumper Geometries on Pedestrian Leg Injury, The 15th National Conference on Vehicle Engineering, November 26, Tainan, Taiwan.
  212. T. L. Teng, B. T. Hu and Y. S. Lin, 2010, Effect of Sitting Posture on the Airbag’s Protection Effectiveness, The 15th National Conference on Vehicle Engineering, November 26, Tainan, Taiwan.
  213. T. L. Teng, T. A. Wu and M. T. Nguyen, 2010, Design of Friendly Bumper for Pedestrian, The 34st National Conference on Theoretical and Applied Mechanics, November 19-20, Yunlin, Taiwan, R.O.C.
  214. T. L. Teng, Y. X. Liu and S. F. Dai, 2010, Study of Airbag Inflation Model in MADYMO, The 34st National Conference on Theoretical and Applied Mechanics, November 19-20, Yunlin, Taiwan, R.O.C.
  215. T. L. Teng, Y. L. Chen and D. Cui, 2009, The Application of Crash Pulse Curve on Crashworthiness in Vehicle Design, The 7th Int. Forum of Automotive Traffic Safety (INFATS), December, Changsha, China.
  216. T. L. Teng and Z. G. Xu, 2009, Numerical Simulation of Frontal Offset Deformable Barrier Test, The 26th National Conference on Mechanical Engineering, November 20-21, Tainan, Taiwan, R.O.C.
  217. T. L. Teng and P. C. Hsu, 2009, Development of Expert System of Corrosion Diagnosis for Pressure Vesseels, The 26th National Conference on Mechanical Engineering, November 20-21, Tainan, Taiwan, R.O.C.
  218. T. L. Teng, Y. X. Liu, Z. H. Xuan and Y. J. Lin, 2009, Application of Thermoplastic Polyurethane for Airbag material, The 14th National Conference on Vehicle Engineering, October 30, Yunlin, Taiwan.
  219. T. L. Teng, Y. L. Chen and D. Cui, 2009, Design of Seat for Reducing Neck Injuries in Rear Impact, The 14th National Conference on Vehicle Engineering, October 30, Yunlin, Taiwan.
  220. T. L. Teng, Y. L. Chen and P. H. Chang, 2009, Effect of Vehicle Seat on Neck Injuries, The 33st National Conference on Theoretical and Applied Mechanics, November 13-14, Maioli, Taiwan, R.O.C.
  221. T. L. Teng, Y. L. Chen and P. H. Chang, 2009, Development of Numerical Model of Rear-Impact Sled Test, The 33st National Conference on Theoretical and Applied Mechanics, November 13-14, Maioli, Taiwan, R.O.C.
  222. Shang-Wen Wang, Liang-Yann Yuan and Tso-Liang Teng, 2008, Analysis of Pedestrian Injuries using Deformable Model, 9th International Symposium and Exhibition on Sophisticated Car Occupant Safety Systems, Germany.
  223. T. L. Teng, G. M. Zhou and P. H. Chang, 2008, Development and validation of suspension system numerical model for wheeled infantry fighting vehicle, The 32st National Conference on Theoretical and Applied Mechanics, November 28-29, Chiayi, Taiwan, R.O.C.
  224. T. L. Teng, K. M. Chen, Y. A. Chu, G. J. Huang and B. C. Shen, 2008, Analysis of spray pattern of isotropic schemes KE-Rod warhead, The 32st National Conference on Theoretical and Applied Mechanics, November 28-29, Chiayi, Taiwan, R.O.C.
  225. T. L. Teng, D. A. Fung and P. H. Chang, 2008, Study of Side Vehicle Crash Pulses, The 13th National Conference on Vehicle Engineering, October 31, Taipei, Taiwan.
  226. T. L. Teng, D. A. Fung and P. H. Chang, 2008, Design of Vehicle Structures for Crashworthiness using Crash Pulses, The 13th National Conference on Vehicle Engineering, October 31, Taipei, Taiwan.
  227. T. L. Teng and W. Y. Tsai, 2008, Design and analysis of Adaptive Airbag, The 13th National Conference on Vehicle Engineering, October 31, Taipei, Taiwan.
  228. T. L. Teng , K. M. Chen, Y. A. Chu, G. J. Huang and B. C. Shen, 2008, Analysis of spray pattern of aimed schemes KE-Rod warhead, The 25th National Conference on Mechanical Engineering, November 21~22, Changhua, Taiwan.
  229. T. L. Teng , Z. G. Xu and W. Y. Tsai, 2008, Numerical Simulation of Frontal Sled Impact Test, The 25th National Conference on Mechanical Engineering, November 21~22, Changhua, Taiwan.
  230. T. L. Teng , Z. G. Xu and W. Y. Tsai, 2008, Development and Test Simulation of Airbag Numerical Model, The 25th National Conference on Mechanical Engineering, November 21~22, Changhua, Taiwan.
  231. T. L. Teng and D. A. Fung, 2007, Study of Frontal Vehicle Crash Pulses, The 31st National Conference on Theoretical and Applied Mechanics, December 21-22, Kaohsiung, Taiwan, R.O.C.
  232. T. L. Teng and B. C. Shen, 2007, Establish the Empirical formulation of Perforation Resistance of Steel Fiber Reinforced Concrete, The 31st National Conference on Theoretical and Applied Mechanics, December 21-22, Kaohsiung, Taiwan, R.O.C.
  233. T. L. Teng and C. P. Peng, 2007, Modeling of Human Head/Neck Dynamics Response to Vertical Impact, The 31st National Conference on Theoretical and Applied Mechanics, December 21-22, Kaohsiung, Taiwan, R.O.C.
  234. T. L. Teng and Q. A. Lei, 2007, Injury Analysis of Occupant of Rollover Test, The 31st National Conference on Theoretical and Applied Mechanics, December 21-22, Kaohsiung, Taiwan, R.O.C.
  235. T. L. Teng and M. J. Zhou, 2007, Development of Numerical Model of Treadmill Frame for the Regulation, The 24th National Conference on Mechanical Engineering, November 23~24, Jhongli, Taiwan.
  236. T. L. Teng and K. W. ZHENG, 2007, Development of Numerical Model of Handle for the Regulation Test, The 24th National Conference on Mechanical Engineering, November 23~24, Jhongli, Taiwan.
  237. T. L. Teng, C. L. Chuang and W. Y. Tsai, 2007, Comparative Study of Full-Scale Side Impact Test Regulation, The 12th National Conference on Vehicle Engineering, November 16, Pingtung, Taiwan..
  238. T. L. Teng and C. P. Peng, 2007, Dynamic Responses and Injuries of Occupant in Side-impact collisions, The 12th National Conference on Vehicle Engineering, November 16, Pingtung, Taiwan..
  239. T. L. Teng and W. Y. Tsai, 2007, Design and Side Impact Analysis of the Curtain Airbag, The 12th National Conference on Vehicle Engineering, November 16, Pingtung, Taiwan..
  240. T. L. Teng, C. T. Pan and T. H. Nguyen, 2007, “Crashworthiness Evaluation of Side-Door Beam of Vehicle,” International Conference on Material Theory and Nonlinear Dynamics, Vietnam.
  241. T. L. Teng, C. C. Tsai and W. Y. Tsai, 2006, Design of Vehicle Frontal Airbag, The 30th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  242. T. L. Teng and Q. A. Lei, 2006, The Establishment and Analysis of Numerical Model of Rollover Test, The 30th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  243. T. L. Teng and K. C. Chang, 2006, Application of Side-Impact Sled Test Numerical Model, The 23th National Conference on Mechanical Engineering, Taiwan, R. O. C.
  244. T. L. Teng and C. L. Chuang, 2006, Numerical Analysis of ECE R95 Full-Scale Side Impact Test, The 23th National Conference on Mechanical Engineering, Taiwan, R. O. C.
  245. H. W. Lan, T. L. Teng, C. C. Liang and D. A. Feng, 2006, Numerical Analysis of Sled Test and Crash Test, The 23th National Conference on Mechanical Engineering, Taiwan, R. O. C.
  246. T. L. Teng, W. Y. Tsai and S. W. Wang, 2006, Study of Design Parameter for the Curtain Airbag, The 11th National Conference on Vehicle Engineering, Taiwan, R. O. C.
  247. T. L. Teng, C. C. Tsai and W. Y. Tsai, 2006, Development of Dynamic Testing FE Models for the Frontal Airbag, The 11th National Conference on Vehicle Engineering, Taiwan, R. O. C.
  248. T. L. Teng, H. W. Lan and D. A. Feng, 2006, Development of Dynamic Testing FE Models for the Frontal Airbag, The 11th National Conference on Vehicle Engineering, Taiwan, R. O. C.
  249. C. C. Liang, T. L. Teng, and C. C. Wu, 2006, Development of KARTING, The 11th National Conference on Vehicle Engineering, Taiwan, R. O. C.
  250. T. L. Teng, 2006, Assessment of Occupant Injuries in Vehicle Crash using Numerical Simulation, The Conference on Technical Development of Vehicle Active and Passive Safety System, Taiwan, R. O. C.
  251. T. L. Teng, C. C. Liang, Y. A. Chu and B. C. Shen, 2006, Failure behavior of steel fiber-reinforced concrete under high velocity projectile, Second International Conference on Engineering Failure Analysis, Toronto, CANADA.
  252. T. L. Teng, C. C. Liang and C. C. Lu, 2006, The Anti-Penetration Properties of Space Armor, The 16th European Conference Fracture, Alexandroupolis, Greece.
  253. T. L. Teng, K. C. Chang and C. H. Wu, 2006, Development and Validation of Side-Impact Sled Testing FE Models, SAE 2006 World Congress, Detroit, U.S.A.
  254. T. M. Shih, T. L. Teng and C. Y. Hsu, 2006, Analysis of Nonlinear Modes by Extended Normal Form Method, IEEE International Conference on CIS and RAM, Bangkok, Thailand.
  255. T. L. Teng, Y. A. Chu, F. A. Chang and B. C. Shen, 2005, Test and Evaluation of SFRC plates under high velocity impact, The 14th National Conference on Science and Technology of National Defense, Taiwan, R. O. C
  256. T. L. Teng, C. L. Chuang and C. H. Wu, 2005, The Study of EuroSID Finite Element Model, The 29th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  257. T. L. Teng and C. T. Pan, 2005, The Crashworthiness Analysis of Side Door Beam, The 29th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  258. T. L. Teng, S. M. Yang and C. H. Wu, 2005, The Numerical Analysis of Sled Testing, The 29th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  259. T. L. Teng, F. A. Chang, Y. S. Liu, C. P. Peng and Y. S., 2005, Ting, Analysis of Dynamic Response of Vehicle Occupant in Frontal Crash, The 10th Conference on Vehicle Engineering, Taiwan, R. O. C.
  260. T. L. Teng and Y. S. Ting, 2005, The Study of Traffic accident Analysis and Vehicle Safety Strategy, The 10th Conference on Vehicle Engineering, Taiwan, R. O. C.
  261. T. L. Teng and W. Y. Tsai, 2005, Development of FE model of Frontal Airbag, Proceedings of the 22th Conference on Mechanical Engineering, Taiwan, R. O. C.
  262. T. L. Teng and T. H. Nguyen, 2005, The Finite Element Models of Impactors for Pedestrian Safety, Proceedings of the 22th Conference on Mechanical Engineering, Taiwan, R. O. C.
  263. T. L. Teng, C. C. Liang, C. H. YU and C. C. Wu, 2005, Crashworthiness Analysis of KARTING, Proceedings of the 22th Conference on Mechanical Engineering, Taiwan, R. O. C.
  264. C. C. Liang, T. L. Teng and P. W. Wu, 2005, Resistant Performance of Perforation of Layered Targets using a Semi-Empirical Method, The 2th International Conference on Computational Ballistics, Cordoba, Spanish.
  265. T. L. Teng, Y. C. Wu, P. H. Chang, K. C. Chiang and C. F. Chiang, 2005, Design of the Interface Structures of Weapon System, The 12th Conference on Foundation Research of the Military, Naval and Air force Academy, Taiwan, R. O. C.
  266. T. L. Teng, and K. T. Chou, 2004, Design and Implementation of Pressure Measurement System for Pressure Garment, Proceedings of the 21th Conference on Mechanical Engineering, Taiwan, R. O. C.
  267. T. L. Teng, and K. T. Chou, 2004, A Study of Pressure Therapy for Pressure Garments, Proceedings of the 21th Conference on Mechanical Engineering, Taiwan, R. O. C.
  268. T. L. Teng, C. C. Liang and C. C. Wu, 2004, The Analysis of Occupant Injury in Frontal Impact of Traffic Accident, Proceedings of the 21th Conference on Mechanical Engineering, Taiwan, R. O. C.
  269. T. L. Teng, C. C. Liang and H. C. Wu, 2004, The Analysis of Occupant Injury in Side Impact of Traffic Accident, Proceedings of the 21th Conference on Mechanical Engineering, Taiwan, R. O. C.
  270. T. L. Teng, F. A. Chang and C. P. Peng, 2004, The Influence of Gait from Motion of Center of Gravity during Human Walking, The 28th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  271. T. L. Teng, C. C. Liang, H. W. Lan and S. M. Yang, 2004, The Comparison of Finite Element Model for a Frontal Impact Dummy, The 28th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  272. T. L. Teng and K. J. Lee, 2004, The Estimation of Stiffness Coefficients on Damage Algorithms, The 28th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  273. T. L. Teng, C. C. Liang and P. H. Chang, 2004, Experimental Investigations on the Fatigue Life Evaluation of the Weldments, 12th Internation Conference of Experimental Mechanics, Bari, Italy.
  274. C. C. Liang, T. L. Teng and C. F. Chiang, 2004, A Study of Crash Strength of Ladder Vehicular Frame, 12th Internation Conference of Experimental Mechanics, Bari, Italy.
  275. T. L. Teng, Y. A. Chu, F. A. Chang and H. S. Chin, 2003, The Establishment of Empirical Formula of Effective Elastic Moduli for Steel-Fiber Reinforced Concrete Materials, The 27th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  276. T. L. Teng, C. C. Liang, T. M. Shis and C. C. Wu, 2003, The Study of Finite Element Model for a Frontal Impact Dummy, The 27th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  277. T. L. Teng, C. C. Liang, C. P. Peng and C. H. Wu, 2003, The Study of SID Finite Element Model, The 27th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  278. C. C. Liang, T. L. Teng, C. F. Chiang and F. K. Tseng, 2003, Biodynamic Response of Pregnant Woman Passenger in Vibration System, The 27th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  279. T. L. Teng, C. C. Liang, C. Y. Hsu and Y. Y. Wu, 2003, The Optimum Design of Filament Wound Composite Pressure Vessels, Proceedings of the 20th Conference on Mechanical Engineering, Taiwan, R. O. C.
  280. P. H. Chang, T. L. Teng, C. C. Liang and C. Y Hsu, 2003, Fatigue Life Prediction of Gun Mount Assembly for Automatic Gun, Proceedings of the 20th Conference on Mechanical Engineering, Taiwan, R. O. C.
  281. C. C. Liang, T. L. Teng, and C. M Wu, 2003, Strength Analysis for the Roll-Over of Bus Section Body, Proceedings of the 20th Conference on Mechanical Engineering, Taiwan, R. O. C.
  282. C. C. Liang, T. L. Teng, and C. H. Yu, 2003, Analysis for the Go-Kart Frame, Proceedings of the 20th Conference on Mechanical Engineering, Taiwan, R. O. C.
  283. C. C. Liang, T. L. Teng, C. C. Lin and Y. H. Tsai, 2003, Dynamic Analysis of Vehicle Frontal Crash, Proceedings of the 20th Conference on Mechanical Engineering, Taiwan, R. O. C.
  284. T. L. Teng and C. C. Wu, 2003, Human Injuries as a Reconstruction Parameter in Traffic Accident, Conference on Traffic safety and Law Enforcement, Taiwan, R. O. C.
  285. T. M. Shih, T. L. Teng, and C. Y Hsu, 2003, Analysis of Nonlinear Normal Modes by Extended Normal Form Method, 11th Conference on Vibration and Noise Engineering, Taiwan, R. O. C.
  286. T. L. Teng, C. C. Liang and P. H. Chang, 2003, Effect of Residual Stresses on the Fatigue of Weldments using Thermal Elasto-Plastic and Multiaxial Fatigue Theory, 10th Internation Conference on Pressure Vessel Technology, Vienna, Austria.
  287. C. C. Liang, T. L. Teng, C. Y. Hsu and C. Y. Jen, 2003, A Study of Stress Concentrations Around Penetrations on Deep-diving Submersible Vehicle, 10th Internation Conference on Pressure Vessel Technology, Vienna, Austria.
  288. C. C. Liang, T. L. Teng, and C. Y. Hsu, 2003, Estimation of Low Cycle Fatigue Life for Submarine Pressure Hull, Fatigue Damage of Material 2003, Toronto, Canada.
  289. C. Y. Hsu, C. C. Liang and T. L. Teng , 2003, The Feasibility Study of Combat System Integration on the Submarine, The 15th Conference of Naval Architects and Marine Engineers, Taiwan, R. O. C.
  290. C. C. Liang, T. L. Teng, C. Y. Hsu and C. Y. Jen, 2002, The Feasibility Study of Self-Designed Underwater Vehicle, The 3rd Conference of Underwater Engineers, Taiwan, R. O. C.
  291. T. L. Teng, and P. W. Yang, 2002, The Injured Analysis of Head and Neck In a Traffic Accident, 2002 Biomedical Engineering Conference, Taiwan, R. O. C.
  292. T. L. Teng, and P. W. Yang, 2002, The Dynamic Analysis of Driver in a Traffic Accident, The 26th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  293. T. L. Teng, C. C. Liang, Y. A. Chu and M. C. Lee, 2002, The Analysis on Penetration Behavior of Concrete Structures Subjected to a Project, The 26th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  294. T. L. Teng, C. C. Liang, Y. A. Chu and C. C. Lu, 2002, The Effect of Design Parameter on the Anti-Penetration Properties of Space Armor, The 26th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  295. C. C. Liang, T. L. Teng and C. Y. Yu, 2002, Biodynamic Response of Shipboard Sitting Subjected to Vertical Shock Motion, The 26th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  296. T. L. Teng, C. C. Liang, Y. Y. Wu and H. W. Chen, 2002, The Effect of Design Parameters on the Slippage Tendency in the Plane Filament-Winding, Proceedings of the 19th Conference on Mechanical Engineering, Taiwan, R. O. C.
  297. T. L. Teng C. C. Liang and P. H. Chang, 2002, Fatigue Life Prediction of T-joint Fillet Weldments, Proceedings of the 19th Conference on Mechanical Engineering, Taiwan, R. O. C.
  298. T. L. Teng C. C. Liang Y. A. Chu and H. S. Chin, 2002, Research on Perforation Resistance of Reinforced Concrete Structure, Proceedings of the 19th Conference on Mechanical Engineering, Taiwan, R. O. C.
  299. C. C. Liang, T. L. Teng, C. H. Liu, C. C. Lin, 2002, Dynamic Analysis for the Frontal Crash of Perimeter frame, Proceedings of the 19th Conference on Mechanical Engineering, Taiwan, R. O. C.
  300. T. L. Teng and P. H. Chang, 2002, The Fatigue Life Prediction of Weldments with Finite Element and Stress Method, ANSYS-Taiwan User Conference, Taiwan, R. O. C.
  301. T. L. Teng, C. C. Liang and P. H. Chang, 2002, Effect of Weld Geometry and Residual Stresses on Fatigue in Butt-Welded Joints, 12th International Workshop on Computation Mechanic of materials, Darmstsdt, Germany.
  302. C. C. Liang, T. L. Teng and P. H. Chang, 2002, Optimum Design of Fiber-reinforced Composite Cylindrical Skirts for Solid Rocket Cases Subjected to Buckling and Overstressing Constraints, 12th International Workshop on Computation Mechanic of materials, Darmstsdt, Germany.
  303. Y. A. Chu, T. L. Teng and C. Chung, 2002, The Model of Premature Analysis on Warhead, Conference of Society of Explosive and Propellants, Taiwan, R. O. C.
  304. T. L. Teng and P. H. Chang, 2001, Fatigue Life of Flat Plate with a Central Hole, 10th International Congress of Fracture, Hawaii, U. S. A.
  305. T. L. Teng and P. H. Chang, 2001, The Effect of Weld Geometry and Residual Stresses on the Fatigue of Welded Joints, The 25th Conference on Theoretical and Applied Mechanics, Tai-chung, Taiwan, R. O. C., 15-16 December 2001.
  306. T. L. Teng and P. H. Chang, 2001, Fatigue Crack Initiation Life Prediction Of Butt Joint and Path Weld for Flat Plate, Proceedings of the 18th Conference on Mechanical Engineering, Taiwan, R. O. C.
  307. T. L. Teng and P. H. Chang, 2001, Effect of Preheating Method on Residual Stress, ANSYS-Taiwan User Conference, Taiwan, R. O. C.
  308. T. L. Teng, C. C. Liang and M. C. Lee, 2001, The Analysis on Penetration Behavior of Protective Structure Subjected to Impact, Proceedings of the 18th Conference on Mechanical Engineering, Taiwan, R. O. C.
  309. T. L. Teng, Y. A. Chu and C. C. Lu, 2001, An Analysis for Anti-Penetration Properties of Space Armor, Proceedings of the 18th Conference on Mechanical Engineering, Taiwan, R. O. C.
  310. C. C. Liang, M. F. Yang, T. L. Teng, and P. W. Wu, 2001, A Study of the Resistant Performance of Perforation for Multi-layered Targets, Proceedings of the 18th Conference on Mechanical Engineering, Taiwan, R. O. C.
  311. C. C. Liang, T. L. Teng, and J. H. Liu, 2001, A Study of High Velocity Impact Dynamics for Circular Bar, Proceedings of the 18th Conference on Mechanical Engineering, Taiwan, R. O. C.
  312. T. L. Teng, and T. H. Yen, 2000, The Structure Shape Design of Vertical Launching Canister, Proceedings of the 17th Conference on Mechanical Engineering, Taiwan, R. O. C.
  313. T. L. Teng and P. H. Chang, 2000, Fatigue Life Prediction of Flat Plate With Central Hole, The 24th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  314. T. L. Teng and M. C. Lee, 2000, The Dynamic Analysis of Nuclear Waste Cask under Impact Loading, The 24th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C.
  315. T. L. Teng and T. H. Yen, 2000, The Structural Strength Design of Vertical Launching Canister, The 9th National Conference on Science and Technology of National Defense, Taiwan, R. O. C.
  316. T. L. Teng and C. Y. He, 2000, The Design and Analysis of Oleo-Pneumatic Shock Absorber, The 9th National Conference on Science and Technology of National Defense, Taiwan, R. O. C.
  317. T. L. Teng , C. H. Lin and C. Chung, 1999, Simulation and Experimental of Cutting Effect for Linear Shaped Charge, 18th International Symposium on Ballistics, San Antonio, Texas, U. S. A.
  318. T. L. Teng and T. H. Yen, 1999, The Structure Strength Analysis of Vertical Launching Systems on Ship Subjected to Underwater Shock and Bad Sea-state, The 12th Conference of Naval Architects and Marine Engineers, Taiwan, R. O. C.
  319. T. L. Teng and C. C. Liang,1999, The Damping Characteristics for viscoelastically Laminated Beams, 1999 ASME Mechanics and Material Conference, Virginia U. S. A.
  320. T. L. Teng and W. C. Tseng, 1999, FEM Analysis of I Beam Connections in Fillet Welds, Proceedings of the 7th National Conference on Ship Engineering, Taiwan, R. O. C.
  321. C. C. Liang, T. L. Teng, and Y. S. Tai, 2001, The Free Vibration Analysis of Submerged Cantilever Plates, Proceedings of Chinese Military Academy Conference on scholarly research, Taiwan, R. O. C.
  322. T. L. Teng and N. K. Hu, 1998, Characteristics of Free Layer Damping Structure, The 7th National Conference on Science and Technology of National Defense, Taiwan, R. O. C.
  323. T. L. Teng, 1998, A Study on the Application of Fuzzy Theory to Ship Structural Control, The 11th Conference of Naval Architects and Marine Engineers, Taiwan, R. O. C. pp.125-129.
  324. T. L. Teng and C. H. Wu, 1998, The Effect of Gun blast on Ship’s Structure, The 7th National Conference on Science and Technology of National Defense, Taiwan, R. O. C.
  325. T. L. Teng and W. C. Tseng, 1998, Effect of Welding Sequences on Residual Stresses, The 7th National Conference on Science and Technology of National Defense, Taiwan, R. O. C.
  326. T. L. Teng and W. C. Yang, 1998, Analysis of Residual Stresses and Distortions in T-joint Fillet Welds, The 7th National Conference on Science and Technology of National Defense, Taiwan, R. O. C.
  327. T. L. Teng, 1998, The Design and Analysis of Submarines Pressure Hull Structure, National Conference of Submerged Engineering, Taiwan, R. O. C.
  328. M. F. Yang and T. L. Teng, 1998, A Study on Noise of Ship(II)-Example and Calculation, Proceedings of the 6th Conference on Vibration and Noise, Taiwan, R. O. C.
  329. M. F. Yang and T. L. Teng, 1998, A Study on Noise of Ship (I)- Estimate Method, Proceedings of the 6th Conference on Vibration and Noise, Taiwan, R. O. C., pp175-188.
  330. T. L. Teng and C. H. Wu, 1998, The Effect of Missile Blast on Ship’s Structure, The 5th National Conference on Foundation Research of the Armed Forces Academy, Taiwan, R. O. C., pp3.16-1-3.16-8.
  331. Y. R. Li and T. L. Teng, 1998, A Study on Military Regulation of Warship Propel Shaft System, Proceedings of the 6th National Conference on Ship Engineering, Taiwan, R. O. C., pp69-83.
  332. Y. R. Li and T. L. Teng, 1998, A Study on Military Regulation of Warship System Interface, Proceedings of the 6th National Conference on Ship Engineering, Taiwan, R. O. C., pp69-83)
  333. T. L. Teng and C. C. Lin, 1998, Analysis of Residual Stresses by Welding, National Conference of Engineering Application Software, Taiwan, R. O. C.
  334. T. L. Teng and C. P. Peng, 1997, A Study on the Application of Fuzzy Theory to Structural Control, Proceedings of the 5th National Conference on Fuzzy Theory and Application, Taiwan, R. O. C., pp.393-398.
  335. T. L. Teng, 1997, The Realization of Boundary Conditions in the Vibration Analysis of Plates Structure, The 10th Conference of Naval Architects and Marine Engineers, Taiwan, R. O. C., pp.119-123.
  336. T. L. Teng, P. H. Chang and H. C. Ko, 1997, Three-Dimensional Thermomechanical Analysis in Circumferentially welded Thin-Walled Pipes, The 10th Conference of Naval Architects and Marine Engineers, Taiwan, R. O. C., pp.416-424.
  337. C. S. Wang, T. L. Teng and B. L. Li, 1996, The Measure Method Discussion on Circular Tolerance of Submerged Pressure Hull Structure, Proceedings of the 6th National Conference on Ship Engineering, Taiwan, R. O. C., pp.57-65.
  338. Y. R. Li, S. W. Shiah, T. L. Teng and W. H. Lai, 1996, A Brief Introduction of The United States Naval Vessel Regulation, Proceedings of the 4th National Conference on Ship Engineering, Taiwan, R. O. C., pp.57-65.
  339. T. L. Teng, 1996, Dynamic Response of Cantilever Plates Panel under Blast Loading, The 9th Conference of Naval Architects and Marine Engineers, Taiwan, R. O. C., pp.135-139.
  340. T. L. Teng, C. C. Liang and C. C. Lin, 1996, Thermal Elasto-Plastic Analysis of AISI 304 Steel, The 5th National Conference on Science and Technology of National Defense, Taiwan, R. O. C., pp.5-1~5-8.
  341. T. L. Teng, and D. M. Shi, 1996, A Study on the Optimum Acme Dispose method to Structural Control, Proceedings of Chinese Military Academy Conference on Scholarly Research, Taiwan, R. O. C., pp.67-73.
  342. T. L. Teng, and C. R. Wang, 1996, Elasto-Plastic and Distortion Analysis of M193 Cartridge, Proceedings of Chinese Military Academy Conference on scholarly research, Taiwan, R. O. C., pp.67-73.
  343. Y. R. Li, C. C. Liang, T. L. Teng and W. H. Lai, 1995, The Design Method of a Ship Structure and Equipment to Resist the Blast, Proceedings of the 3th National Conference on Ship Engineering, Taiwan, R. O. C., pp.299-301.
  344. T. L. Teng and C. R. Wang, 1995, The Behavior of the Cartridge Case and Chamber During Firing, The 19th Conference on Theoretical and Applied Mechanics, Taiwan, R. O. C., pp.191-196.
  345. C. C. Liang, T. L. Teng, W. H. Lai and C. Y. Hsu, 1995, The Analysis of Resemblance Guppy Submarines Pressure Hull Structure, The 8th Conference of Naval Architects and Marine Engineers, Taiwan, R. O. C., pp.106-115.
  346. C. C. Liang, T. L. Teng, W. H. Lai and K. C. Hsu, 1994, A Study of Submarines Pressure Hull Structure Strength, The 7th Conference of Naval Architects and Marine Engineers, Taiwan, R. O. C., pp.29-41.
  347. T. L. Teng, and D. M. Shi, 1994, Structural Control Analysis of Ship Mast under Blast Loading, The 3th National Conference on Science and Technology of National Defense, Taiwan, R. O. C.
  348. C. C. Liang, T. L. Teng, and C. J. Lin, 1993, Transient Dynamic Analysis of Submerged Plate under Blast Loading, The 5th Conference of Naval Architects and Marine Engineers, Taiwan, R. O. C., pp.231-242.
  349. T. L. Teng, and C. J. Lin, 1993, Transient Dynamic Analysis of Ship Mast under Blast loading, The 5th Conference of Naval Architects and Marine Engineers, Taiwan, R. O. C., pp.33-44.
  350. C. C. Liang, T. L. Teng, K. H. Huang and T. H. Lin, 1993, A Study of Design Method on a Ship structure to resist the Blast, The 4th Conference of Naval Architects and Marine Engineers, Taiwan, R. O. C., pp.1-24.
回到頁面上方 top

研究計畫

項次 計畫名稱 計畫內擔任工作 起迄年月 補助機構
1新型自行車頭盔內襯結構之研製(2/3)主持人105/8~106/7科技部
2提升工具機中小企業之產品開發能量(4/4)主持人105/1~105/12中區技職校院區域教學資源中心
3水下載具壓力殼及重要附屬結構應用技術先期研發(Ⅱ) 共同主持人105/4~106/3科技部
4水下爆炸對氣墊船之損傷評估研究(3/3)共同主持人105/8~106/7科技部
5新型自行車頭盔內襯結構之研製(1/3)主持人104/8~105/7科技部
6提升工具機中小企業之產品開發能量(3/4)主持人104/1~104/12中區技職校院區域教學資源中心
7排球時間差攻擊著地對下肢關節運動學、動力學及副韌帶傷害風險之分析研究共同主持人104/8~105/7科技部
8水下載具壓力殼及重要附屬結構應用技術先期研發(Ⅰ)共同主持人104/5~105/3科技部
9水下爆炸對氣墊船之損傷評估研究(2/3)共同主持人104/8~105/7科技部
10抗震裝置應用於水下載具及其重要裝備之研究 (3/3)主持人103/8~104/7科技部
11水下爆炸對氣墊船之損傷評估研究(1/3)共同主持人103/8~104/7科技部
12提升工具機中小企業之產品開發能量(2/4)主持人103/1~103/12中區技職校院區域教學資源中心
13抗震裝置應用於水下載具及其重要裝備之研究 (2/3)主持人102/8~103/7國科會
14提升工具機中小企業之產品開發能量(1/4)主持人102/1~102/12中區技職校院區域教學資源中心
15抗震裝置應用於水下載具及其重要裝備之研究 (1/3)主持人101/8~102/7國科會
16校園節能淨源技術之開發與教育推廣(2/2)主持人101/4~101/12教育部
17發泡棉內結構複合式車體材料之研製(3/3)主持人100/8~101/7國科會
18校園節能淨源技術之開發與教育推廣(1/2)主持人100/4~100/12教育部
19發泡棉內結構複合式車體材料之研製(2/3)主持人99/8~100/7國科會
20NV1整車CAE模型組裝作業主持人98/09~99/5車輛測試研究中心
21發泡棉內結構複合式車體材料之研製主持人98/08~99/7國科會
22先進型氣囊模組安全性能評估與分析模擬主持人97/7/1~98/6/30全創公司
23行人碰撞感測器開發主持人97/4~97/12中科院
24方向性動能桿散佈模式分析與損效評估研究主持人97/4~97/12中科院
25人/車防護安全設計研發技術(3/3)主持人96/12~97/11經濟部
26SUV車型空氣囊系統分析技術建立主持人96/8~97/11全創公司
27車輛被動安全數值工具庫與程式之建立及應用(3/3)主持人96/8~97/7國科會
28行人碰撞事故中人體動態反應數值模擬主持人96/5~96/11中科院
29動能桿散佈模式分析與損效評估研究主持人96/4~96/12中科院
30人/車防護安全設計研發技術(2/3)主持人95/12~96/11經濟部
31裝甲車承受大口徑武器系統射擊後座力動態分析及介面結構最適化研究共同主持人95/9~96/12兵整中心
32小型競賽車輛之自行設計與研製-子計畫(四):車架結構分析與設計製作共同主持人95/8~96/7國科會
33車輛被動安全數值工具庫與程式之建立及應用(2/3)主持人95/8~96/7國科會
34大客車結構補強型式對於車體強度影響性之研究共同主持人95/6~96/5車輛測試研究中心
35簾幕式空氣囊對乘員保護效果之模擬分析研究與探討主持人95/2~95/11中科院
36人/車防護安全設計研發技術(1/3)主持人94/12~95/11經濟部
37車輛被動安全數值工具庫與程式之建立及應用主持人94/8~95/7國科會
38小型競賽車輛之自行設計與研製-子計畫(四):車架結構分析與設計製作共同主持人94/8~95/7國科會
39小型水下載具擇優設計及建造規劃之研究(IV)—戰鬥系統之研究主持人94/5~95/4國防工業發展基金會
40防側撞氣囊展開數值模擬分析主持人94/2~94/11中科院
41整車側撞安全性改良分析主持人94/1~94/11車輛測試研究中心
42小型競賽車輛之自行設計與研製-子計畫(四):車架結構分析與設計製作共同主持人93/8~94/7國科會
43纖維纏繞壓力容器之最適化設計主持人93/8~94/7國科會
44潛艦之關鍵技術基礎研究-潛艦上重要裝備之抗震分析(3/3)共同主持人93/8~94/7國科會
45側撞事故中人體動態反應數值模擬主持人93/1~93/12中科院
46碰撞人偶正後向衝擊影響參數比對驗證之研究主持人93/1~93/12車輛測試研究中心
47武器安裝介面結構之設計主持人93/1~93/12國科會
48潛艦之關鍵技術基礎研究-潛艦上重要裝備之抗震分析(2/3)共同主持人92/8~93/7國科會
49半穿甲彈頭早爆反應分析之研究(2/2)主持人92/8~93/7國科會
50小型水下載具自行研製之可行性評估—子計畫(Ⅳ)小型水下載具戰鬥系統之研究主持人92/7~93/6國防工業發展基金會
51陰極射線管自動化測試系統之規劃與設計主持人92/6~93/5國科會
52生醫學程之規劃設計與實驗教學主持人92/1~92/12大葉大學
53潛艦之關鍵技術基礎研究-潛艦上重要裝備之抗震分析(1/3)共同主持人91/8~92/7國科會
54半穿甲彈頭早爆反應分析之研究(1/2)主持人91/8~92/7國科會
55小型水下載具自行研製之可行性評估—子計畫(Ⅱ)戰鬥、潛航、水下操控、導航、定位與通訊系統之研究主持人91/1~91/12國防工業發展基金會
56多層防護結構抗貫穿能力之研究主持人91/1~91/12國推會
57方法研究對提昇銲件品質之應用主持人90/8~91/7國科會
58電子構裝製程中複層基板間彎曲變形之探討共同主持人90/8~91/7國科會
59防護結構承受高速撞擊之侵徹行為分析(II)主持人90/3~90/12中科院
60水屏彈爆炸對艦體安全之影響研究及資料蒐集彙整協同主持人90/1~90/12國推會
61單球型深海載具壓力殼之強度分析主持人89/8~90/7國科會
62潛艦設計系統與相關軍規之研究(II)協同主持人89/7~89/12國推會
63高性能複合材料壓力容器之結構分析與設計(II)協同主持人89/7~89/12中科院
64船艦艙內結構與裝備破損分析(II)協同主持人89/7~89/12國推會
65防護結構承受高速撞擊之侵徹行為分析(I)主持人89/3~89/12中科院
66線型聚能裝藥爆炸切割效應之研究主持人88/8~89/7國科會
67高性能複合材料壓力容器之結構分析與設計(I)協同主持人88/7~89/6中科院
68船艦艙內結構與裝備破損分析(I)協同主持人88/7~89/6國推會
69火炮爆震對操作環境之影響主持人88/7~89/6中正理工學院
70船艦軸系及舵部爆震強度之合作研究協同主持人87/7~88/6聯合船舶設計中心
71飛彈垂直發射系統爆燄對操作環境影響之研究(II)協同主持人87/7~88/6中科院
72105公厘銅質彈筒結構最佳化設計協同主持人87/7~88/6國推會
73潛艦壓力殼疲勞壽限評估-浮潛壽命評估協同主持人87/7~88/6國推會
74減少銲接殘留應力方法之研究主持人87/7~88/6中正理工學院
75起落架液氣減震器最佳化設計分析研究主持人87/7~88/6國推會
76模糊理論於船艦結構主動控制之應用主持人86/8~87/7國科會
77歐洲軍規相關問題之研究研究員86/7~87/6經濟部
78飛彈垂直發射系統爆燄對操作環境影響之研究(I)協同主持人86/7~87/6中科院
79戰鬥載具結構動態吸振器之最適化設計主持人86/7~87/6中正理工學院
80船舶噪音估算模式之研究研究員86/7~87/2交通部
81焊接結構熱彈塑性分析主持人86/7~87/2國科會
82嵌板結構於振動分析中真實邊界條件模擬之研究主持人85/8~85/7國科會
83最佳極點配置法於結構控制之研究主持人85/7~86/2國科會
84考慮結構流體藕合效應之潛艦壓力殼強度評估(II)協同主持人85/7~86/6國推會
85艦用系統介面軍規之研究研究員85/7~86/6經濟部
86嵌板結構承受爆震負荷之動態反應分析主持人84/8~85/7國科會
87考慮結構流體藕合效應之潛艦壓力殼強度評估(I)協同主持人84/7~85/6國推會
88重要軍規項目之研究研究員84/7~85/6經濟部
89艦艇抗爆震及減振動噪音方法之研究研究員83/7~84/6聯合船舶設計中心
90軍規適時化及本土化之研究研究員83/7~84/6經濟部
91船艦上重要裝備抗震評估方法之研究協同研究人員82/7~83/6國推會
回到頁面上方 top

E-Mail

  1. service@mail.hust.edu.tw
回到頁面上方 top